Shot Blasting Machines

We, Synco Industries Ltd., are a leading manufacturer of shot blasting machines and provide numerous solutions to the cookware and other industries for blasting utensils etc. in our multi-satellite shot blasting machines.

S7-150

Recommended for light job and intermittent requirement of blasting. An economical model. Light weight and mobile. Can be operated by one operator.

S7-300R

Recommended for medium production work. Machine have all the features of a production machines. For automatic start/stop machine can be provided with remote control unit.

S7-500R

A heavy duty production machine. Can be fitted with tool for internal cleaning of pipes, remote control valve and deadman handle.

S7-1000R

A heavy duty production machine. Can be fitted with tool for internal cleaning of pipes, remote control valve and deadman handle.

S7-C-900

A continuous blasting machine with manual refilling of abrasive media without any interference in blasting process. Recommended for high production rate. Remote control valve and deadman handle are standard fitments.


Consists of Following Special Features :

Pressure feed System of abrasive propelling resulting

in higher production rate.

Pressure Vessel tested at 250 psig

Specially designed blast nozzles with Tungsten

Carbide / Boron Carbide Lining resulting in longer life of nozzles

Low weight abrasion resistant blast hose

Remote Control Valve for operator ’s safety

(In compact design)

No electric connection required

Restrictive environmental legislation and a greater awareness of health hazards were the main reasons for development of Vacuum Blasting Machines. The advantages of the equipment are not limited to preventing environmental and health problems, in many applications it is also a fully justified method of surface preparation on an economic basis.

Disposal costs of hazardous waste is minimal by the use of recyclable abrasives, so the amount of abrasives used is much lower than compared with open-blasting. The equipment has many applications. Besides for construction and maintenance of ships, the equipment can also be used for the maintenance of bridges, machinery, power plants or for the renovation of concrete. steel , shipbuilding , offshore and (petro) chemical industries and also for maintenance purpose in the civil works sector such as cleaning bridges , tunnels and buildings etc.

The Synco Model : SPBV 08C-1 is a compact and versatile vacuum blasting machine which gives the user flexibility of cleaning components to a depth / height of about 5 mtrs from the machine position. The sturdy construction is designed for rough handling. This model is easy to move to the place of blasting due to its compact size where other machines find difficulty to reach such as submarine holds.

Features:

• Top quality
• Sturdy construction
• Flawless functionality
• Very durable

We, Synco Industries Ltd. are a leading manufacturer of airless type shot blasting machines. Our rotary barrel type shot blasting machines offer high efficiency, low pollution and are most suitable for bulk productivity requirements.

Rotary Barrel type shot blasting machine is suitable for shot blasting of smaller parts in batches with cost effectiveness. Small batches of 80-100 kgs. can be cleaned in shorter blasting cycle. This is a most populer model due to its cost effective price and lower running cost

These are tailor-made or custom built machines designed for specific purposes wherein the work pieces may be tumbled, rotated, rolled, carried, even pushed, all according to necessity, convenience and economy. In these machines the work is carried upon hangers suspended from an overhead monorail.

This type of machine may be classed as a single or multiple pass, indexing, spinner hanger or straight through type. Again the machine may be single or multi wheel type depending on the product size and the required output. The overhead conveyor type machine can be designed to carry weights up to 4 tons per hanger.

The layout of monorails circuits may be unlimited in variety. Overhead plants have two outstanding features; continuity of production and flexibility. There are very few workpieces that are not capable of being suspended by some type of suitable hanger. these help in Plate Cleaning Machine, Plate Blasting Machine,
Sheet Blasting Machine, Vessel Cleaning Machine & Hanger Type Machine.

The diabolo form of rotation and traversing is used. The loading and unloading is done by means of manipulators. The machine may be used to blast objects in the form/shape of bars, tubes etc. these are also know as Roll Etching Machine & LPG Cylinder Blasting Machine.

• Remove rust, mill scale, heat scale and carbon buildup from metals
• Strip paint, powder coating, plating and anodising from parts for rework
• Eliminate burrs, parting lines, flashing and other
• defects from castings and injection-molded parts
• Extract residual sand from castings
• Sand Removal
• Tube Cleaning
• Beautify steel, stainless steel, aluminium, brass and other metals with a matte finish
• Etch artwork and lettering into glass, stone, plastics, metal and other material
• Clean release agents and material buildup from molds