Cut Wire Shots for Shot Blasting
|Minimum Order Quantity||25 Per Kg.|
|Shape||Conditioned and As cut both Available|
|Size||0.4 to 2.0 mm Alu., 0.40mm to 1.60mm Steel and SS, 0.76mm to 1.6mm Zinc, 0..50 to 3.2 mm Copper|
|Packaging Type||25 kg. bags or 50 kg. Bags Packing|
|Hardness||Regular - HRC 45- 55, High - HRC 55-60 and Special - HRC 50-55.|
|Grade||All Grades are available|
|Packaging Size||25 or 50 Kg.|
As-cut particles are an effective abrasive due to the sharp edges created in thecutting process. However, as-cut shot is not a desirable shot peening media.The sharp edges, which are potentially damaging to fatigue life, must beremoved in a process called "conditioning".
Conditioned Cut Wire (CCW) shot is normally manufactured in two degreesof conditioning - Normal Conditioning which meets the shape requirements ofSAE J441 specification, and the more rounded Special Conditioning whichmeets the requirements of Aerospace specifications such as AMS 2431.
Glass Beads (Shot Blasting / Sand Blasting)
Steel Shots (Shot Blasting / Shot Peening)
|Size||0. 3mm to 2. 0 mm|
White Aluminum Oxide Grits (Shot Blasting / Sand Blasting)
|Bulk Density||123 lbs / ft3|
|Features||Flawless finish, Rust proof & Precisely designed|
Chilled Iron Grits (Shot Blasting / Sand Blasting) (CI Grit)
We supply Chilled Iron Grits (CI Grit) for shot blasting and sand blasting applications in all standard sizes.
Aluminum Oxide Grits (Shot Blasting / Sand Blasting)
|Machine Type||Table Type|
Stainless Steel Shots (Shot Blasting / Shot Peening)
Due to its exceptionally low break down rate, virtually no dust is produced from the abrasive itself. The non brittle nature and high density of Synconox™ Shots, results in high impact energies to the work piece resulting into faster cleaning rates.Synconox™ shots are used for applications where residue on the blasted component is undesirable and/or when a very bright surface finish is required. It will leave no ferrous residue or staining on the work piece. Synconox™ shots are widely used on magnesium, aluminum, nickel and chromium based alloy components and other non-ferrous parts.
Steel Grits (Shot Blasting / Sand Blasting)
Garnets (Shot Blasting / Sand Blasting)
The low consumption rate and recyclability up to 5 times reduces the volume of waste for disposal. Being a naturally occurring mineral it is non-polluting to the environment. Syncgar™ can be used for preparation of steel and non ferrous metal surfaces prior to coating, as cutting media for water jet cutting machines, engraving of stone and glass, cleaning of concrete and brickwork, cleaning of components in contamination sensitive areas, and bonded and coated abrasives.
Ceramic Abrasive Bead (Shot Blasting / Shot Peening)
The higher density of ceramic beads ensures peening intensities equal to those obtainable with glass beads at a reduced abrasive velocity. Synczir™ thus have a far less abrasive breakdown and dust generation which in turn results in a cleaner working environment and better operator visibility. Synczir™ narrow particle size distribution coupled with low breakdown rates up to 15:1 as compared to glass beads enables repeatable, consistent result to be achieved, which is a critical consideration when selecting a media for peening application. Typical applications include mould cleaning, deburring delicate items, peening and stress relieving, deburring plastic components and paint removal.
Plastic Grits (Shot Blasting)
|Size||0.85 - 0.42 mm|
Its high durability and irregular particle shape ensures maximum productivity and abrasive life when utilized in equipment having recycling and reclassification facilities. Syncplasticgrit™ is highly suited for flash removal from discreet computer components, paint removal or cleaning of soft or easily damageable substrates such as aluminum, silver, copper or gold.